Standard
Features:
• Choice of OEM print units; Sato-, Zebra- and other
compatible print engines
• Application modules for side, top, bottom, angles,
recesses and corners
• Downtime reduced with alarm options, e.g. low label
and/or ribbon alarm (status controls)
• Easy integration with other equipment
• Left or right-handed versions
• Accuracy ± 0.04” (1 mm), depending on
application module and label size
Options:
• Corner wrap, etc.
• Swingarm tamp
• Support stand
• Alarm beacon
• Tamp position sensor
• Vacuum control modules
• BluePrint label creation and system integration software
Label Roll Size:
• 11.8” (300 mm) outside diameter, wound on 3”
(76 mm) inside diameter core
• Optional 15.7” (400 mm) unwind
Label Style:
• Diecut, waste removed, outside wound with 0.12”
(3 mm) gap (minimum) in running direction
Operator Controls:
• Product delay, label apply dwell, jog reset
Electrical Requirements:
• 115/220/240 Vac 50/60Hz single phase at up to 300W
max
Weight:
• Approx. 77.4 lbs. (35 kg), dependent on machine configuration
Compressed Air:
• Clean, dry air at 5.6 bar consumption between 5.3
to 127.2 quarts
per minute (5 liters to 120 liters/min.), dependent upon application
method and rate
Interfaces:
• Depending on OEM printer configuration, e.g. parallel,
high-speed
parallel, RS 232 serial, high-speed serial, RS 422, Ethernet
Standard Label Application Modules:
• Airjet blow: (130x180, 180x180, 130x230, 180x230 mm
(WxL)
• Tamp (50 mm 160 mm, 300 mm stroke-length) |
|
