|
| Marsh
320Si
- Specifications
|
- Controllers
• IP-54 stainless steel industrial enclosure
• 7.5" (19 cm) or 10.4" (26.4 cm) touch-screen
interface
• 2 printheads per printer
• Ethernet networking connection
Print stations (optional)
• IP-54 stainless steel industrial enclosure
• Drive capability for 2 printheads
• Photocell and shaft encoder connections
• 2 litre capacity pump driven ink system
Printhead
• Print resolution up to 40dpi
• Maximum line speed at optimum resolution 200 feet/min.
(60 m/min.)
• Throw distance up to 1.2” (30 mm)
• 16 channel printhead
• 10-foot (3 m) umbilical length
Standard software
• Standard large character single line text up to
0.96” (24 mm)
• Standard Font set 9, 12 and 16 dot high
• Date and Time
• Counters
Optional software modules
A wide range of additional text, graphics and
barcode modules are available.
Electrical requirements
• Supply voltage: 110-230 VAC +/-15%
• Frequency: 50 Hz to 60 Hz
• Controller power consumption: 60 VA
• Print station power consumption: 150VA
Weight
• Controller - 14 lbs. (6.3kg)
• Print station - 24.3 lbs. (11kg)
• Printhead - 4.6 lbs. (2.1kg)
PC Software Requirements
Windows® 95, 98, NT, 2000
Printhead Orientation
Distance to print surface - no greater than
1.2” (30 mm)
Firing directions - 360°
Mounting - conveyor
Messages
Alphanumeric lines
Standard one line with an option for second
line per printhead
Print Heights
0.5” to 0.94” (12.7 mm to 23.9 mm)
Storage
32 MB for message, font and graphics
Ink
Colors
Black, blue and red
Capacity
2 liter ink reservoir; 1-liter ink bottle
Substrates
Water-based and fast-dry solvent-based for both porous
and non-porous substrates
Environmental Limits
Operating temperature
41°F to 113°F (5°C to 45°C)
Relative humidity
0 to 90% non-condensing
Ink consumption
Typical ink consumption based on font and
average drop size
|
|
| |
|
